Wind Power
Questions & Answers
Ideas
Lab Projects
Sort By:  DATETIME  rating
1-7 of 7
Ideas Search Result
Picture
Jay
 
93%
The generator will be designed to capitalize on the energy potential available both in the winds above the ocean, and in the currents flowing beneath the waves. The device will use an omnidirectional wind turbine sitting 47 meters above the sea on one end of a vertical shaft, with a different type of omnidirectional turbine design, a 15 meter diameter, spinning at the other end under the surface. The floating unit is supposed to be stable and self-righting, thanks to a...
Picture
JB
 
93%
By building wind turbine towers from concrete instead of steel, the top height of a turbine column could be increased by 20 meters. To determine if concrete would be a viable replacement for steel, hydraulic equipment was used to test the load-bearing capabilities of three column-and-panel segments connected in different ways. All three versions were able to withstand 150,000 pounds of lateral load, with is 20 percent more than the maximum load of current turbine columns of the...
Picture
Jocker
 
93%
Featuring a wide-mouth funnel design, a new wind turbine could lower the cost of wind power to a price that is competitive with natural gas. The new design will capture the wind with its wide-mouthed funnels, directing the wind though narrow passages that will naturally speed up its flow. The accelerated wind will then be sent to a ground-level turbine, which will make maintenance both easier and safer while also reducing noise and vibration. The new technology will generate...
Picture
Jared
 
92%
The skies will get a bit safer for birds with the wind turbine, which will use no blades at all. The turbine will capture up to 80 percent of the wind's kinetic energy (current turbines only capture about 30 percent). Instead of spinning blades, the wind will be harnessed by a sail that will move in a non-rotational back and forth motion. The motion will then be converted to a hydraulic pressure that can either be stored or instantly converted to electricity via a hydraulic motor...
Picture
Curious
 
92%
The turbine will be easily assembled and pack flat for transport. It will be retrofitted on a roof without the need for a supporting unit, and will be a self-starting turbine, able to cope with variable wind speeds. The turbine design will be adapter to sizes from 1 to 24kW, and its minimal noise will make it both wildlife and neighbor friendly.
Picture
Patrik
 
92%
A new floating wind turbine will be able to generate more energy by harnessing higher altitude winds, and could be used at remote sites. The turbine will be contained within an inflatable tube-shaped shell filled with helium, which will allow it to rise to the strong winds at high altitudes while remaining tethered to the ground. Besides harnessing more powerful winds, the turbine will require little maintenance.
Picture
Max
 
93%
11/04/2011
A new wind turbine will not only be silent, it will also be adjustable, visible to birds and bats, and will be more efficient than current three blade turbines. The turbine will feature a solid composition and will withstand winds as much as 118 mph. It will be able to generate up to 32,000 kilowatts hours per year with an average wind speed of just under 6 mph, with a efficiency 30% more than conventional three blade turbines. The turbine will also be silent and compact, ideal for...
Advertise With Us